Conector JST SH 1.0mm 4 pins

Conector JST SH 1.0mm 4 pins#

The JST SH 1.0mm 4 pins is a connector that is used to connect the DualMCU ONE board to devices such as sensors, actuators, and other peripherals. The connector has a pitch of 1.0mm and is commonly used in small electronic devices.

JST SH 1.0mm 4 pins

Fig. 34 JST SH 1.0mm 4 pins#

For connecting the JST SH 1.0mm 4 pins connector to the DualMCU ONE board, follow the steps below:

  1. Identify the connector: The JST SH 1.0mm 4 pins connector has a pitch of 1.0mm and 4 pins.

JST SH 1.0mm 4 pins

Fig. 35 JST SH 1.0mm 4 pins (example for communication I2C)#

  1. Connect the connector: Align the connector with the pins on the DualMCU ONE board and gently push the connector onto the pins.

Caution

Sometimes the connector colors do not correspond to the pins. Be careful when connecting the connector to the board.

  1. Verify the connection: After connecting the JST SH 1.0mm 4 pins connector to the DualMCU ONE board, verify the connection by checking the pins on the board.

JST SH 1.0mm 4 pins connected

Fig. 36 JST SH 1.0mm 4 pins connected#

Note

The JST SH 1.0mm 4 pins connector is compatible with Cocket Nova developed board.